Elevate Your Bathroom - Steps To Install A New Shower Unit

Elevate Your Bathroom - Steps To Install A New Shower Unit

Blog Article

Schedule Services

How do you really feel when it comes to How to Install a Shower Enclosure ?

A successful shower installation needs careful preparation and also a great deal of job. Most of the times, you will certainly require to do three types of jobs: mounting wall surfaces, installing the plumbing, and completing wall surfaces.

Prep work

To start with, you must choose the kind of shower that you want to mount. It is important to determine whether the chosen shower is capable of managing specific systems as well as can control a risk-free degree of water via the central heating boiler. The majority of shower devices nowadays are made to be adaptable to various water pressures (such as stored hot water and cold mains).
It is also essential to consider the water pressure as well as the planning of the piping and drainage for the shower

Different Types of Shower Units

Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be linked to the bathroom tap as per your requirement, and the water temperature can be changed by means of the taps. Push-on mixers are cheap as well as incredibly easy to install. However, although the hose connection is straightforward, it is conveniently displaced. Furthermore, it is troublesome to readjust the temperature.

Bath/Shower Mixer: The hose pipe and spray of this type of shower are integrated with a bath mixer tap, and the temperature level can be changed with the bath taps. It is a very inexpensive alternative and also no additional plumbing is involved. However, the bath/shower mixers additionally deal with troublesome temperature control alternatives.

Handbook Mixer: The tube as well as spray of a hands-on mixer shower unit belong of the wall device as well as the hot and cold water products are linked to a solitary valve The temperature level and also pressure of the water are controlled via either one or a range of knobs (in extra costly showers). Although temperature control is a lot easier in hands-on mixer kinds, they are a lot more expensive than the formerly pointed out mixers. They also call for additional plumbing of cold and hot supply of water pipelines.

Thermostatic Mixer: The hose pipe and spray of this shower kind belong of the wall system and the cold and hot water products are connected to a solitary shutoff here also. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be as well hot. Among the biggest benefits of a thermostatic mixer shower type includes hassle-free temperature control. Nonetheless, it is the most pricey of the different mixer options.

Power Shower: A power shower is a single device including a powerful electrical pump that is capable of modifying both the water pressure and also temperature. This sort of shower can be fitted if there is supply of water from a cold water tank and also a hot water cyndrical tube. A power shower makes the adjustment of both stress as well as temperature level easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a mix central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed into a keys cold water supply and it heats up the water electrically. It is necessary to note that for this shower kind to be set up, the keys pressure requires to be at the very least 0.7 kg/sq cm (10lb/sq in). The system enables the temperature level and also pressure to be changed using a knob. Models with temperature stabilisers are much better as they continue to be untouched by other taps in other places in use within the home. A major disadvantage of electrical showers is that the control handle only enables the choice of heats at much less stress, or lower temperature levels at a better pressure. This is troublesome in the winter when the spray is often weak and the mains water is cooler. However, this problem is tackled in some designs which are offered with a winter/summer setup.

Approach

Depending on the type of shower you want to mount, the shower head have to either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it must have a check valve.
Before beginning, it is suggested to mark the positions of the shower head and control, and to plan the pipe-work entailed. Additionally, the drainage system to remove the waste water will need to be planned. Both positions of the cable course and also the shower button will certainly likewise need to be taken into consideration if an instant or electrical shower device is being set up.
Utilize the direction guide provided with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is necessary to cut off the water. In order to shield the pipelines, they ought to be given a waterproof covering as well as additionally fitted with isolating valves. The pipelines can after that be buried into the wall surface as well as plastered over to neaten the total look.
Fit the base tray, shower head, and installations.
Connect the primary shower control to the pipes that will be supplying the water (This may require a women screw thread adapter).
Reconnect the water supply and also test the pipelines for any leakages, as some might need firm.
If you are setting up an electric shower, remember to turn off the power supply before making any electric links. When these links have actually been made (there ought to be assistance within the instruction manual), the power supply can be switched over back on.

Changing Water Pressure to Suit Your Shower

The cold water storage tank can be raised to a higher height (sometimes just 150mm (6inches)) by installation a solid wooden support under it - potentially composed of struts and blockboards. If you pick this alternative, the main and circulation pipelines will certainly also need to be elevated to satisfy the new height of the storage tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it has to be linked into the power supply in order to run.

Piping as well as Drain

It is best to use 15mm size supply pipes, and also make the go to the shower as short and also straight as feasible so as to keep optimal pressure and also reduce heat loss. In addition, by minimising using elbow joints for pipe edges, you can lower the resistance in the flow of the supply of water. You can accomplish this by flexing the pipes rather.

Many Usual Errors

Going against or disregarding regional code restrictions.

Utilizing pipelines that are too tiny.

Attaching copper to galvanized without making use of a brass or dielectric fitting in between the two.

Not making use of tape or pipe substance at threaded joints.

Not leveling your fixtures when mounting them.

Not setting up an air void filling for components.

Cutting supply stub outs as well brief to set up the shutoff valves onto after the ended up wall remains in place.

Not properly straightening tubing into installations or stop shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing goes to an angle will trigger a leakage.).

When turning the water back on in your house, constantly run the outside pipe shutoff or flush your bathrooms to hemorrhage dirt as well as air from the lines. This particles can cause issues in your sink faucets as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a passionate person who reads on How to Install a Direct-to-Stud Shower Enclosure, I think sharing that excerpt was a good thing. Enjoyed reading our entry? Please share it. Let another person check it out. Thank-you for taking the time to read it.

Get Quote

Report this page